Speakers
Plenary Speakers
Shufan Wu
Dr Shufan Wu: IAA Academician, AIAA Associate Fellow, Chair Professor and the director of Smart Satellite Technology Centre (SSTC) at the School of Aeronautics and Astronautics (SAA), Shanghai Jiao Tong University (SJTU), China. He was graduated from the Nanjing University of Aeronautics and Astronautics (NUAA) in China with BSc, MSc, and PHD in 1990s. He worked as an associate professor (1994) and full professor (1998) in NUAA, then he has spent 17 years in Europe working at the TU Braunschweig in Germany (1995-1996), TU Delft in Netherlands (1998-1999), Surrey University in UK (2000-2002), and the European Space Research and Technology Centre (ESTEC) of the European Space Agency (ESA) (2002-2013), working all the time in aerospace research and technologies. He also worked as the Chief engineer and manager of the French-Chinese astronomy science mission SVOM project and the STU-2 CubeSat mission (consisting of 3 Cube Satellites) during 2013-2017 in the Shanghai Engineering Centre for Microsatellites (SECM). He moved to SJTU in July 2017 as a chair professor, served as the executive deputy dean of SAA. His main research topics cover the space science exploration, guidance, navigation and control of flight vehicle, satellite system engineering, micro/nano satellite technologies and application. In 2015, Dr Shufan Wu co-founded the LandSpace Ltd (See: https://www.landspace. com/en/index.html), the first Chinese commercial launcher company. In 2017, he founded the Beijing Minospace Ltd (see https://en.minospace.cn/), a commercial space company focusing on satellite manufacturing. In 2022, he co-founded the SpaceRobot Ltd, a commercial company focusing on in- orbit service and operation technologies and engineering. In 2025, he founded the Astra Intelligent Satellite System Ltd (AI-Sat Ltd), a commercial micro/nano satellite companies focusing on application and space science exploration.
Melanie Berg
Melanie Berg is the Founder and CEO of Space R3 LLC, with over 37 years of experience in ASIC and FPGA design, verification, and reliability for space systems. She has supported numerous NASA missions, including FPGA design contributions to New Horizons: Pluto and Beyond. She spent more than 20 years at NASA’s Goddard Space Flight Center in the Radiation Effects and Analysis Group, where she led advanced research in radiation effects and mitigation for microelectronics operating in harsh environments. She authored NASA FPGA radiation effects test guidelines and developed best practices for mitigation strategies now used across the industry. Her expertise includes ionization effects, error-response characterization, robust design and verification methodologies, and hardness assurance for spaceflight systems. She has published and presented extensively on improving the reliability and survivability of critical space electronics.
George Delic
Dr. George Delic holds a Ph.D. in Theoretical Physics. After graduation he explored post-doctoral and faculty appointments in Germany, USA and South Africa. On relocating permanently to the USA he worked as staff member at The Ohio Supercomputer Center. After this came an appointment as a Contract Task Manager providing technical and science support for the U.S. EPA user community at the National Environmental Supercomputing Center (NESC). This technical support included: applications software expertise, numerical algorithm research and development, porting/optimization of applications to advanced computer languages or architectures, and communications infrastructure development, such as workshops, customer training, and outreach. Significant project accomplishments included a "superior'' (highest) rating on EPA/NDPD contract award for three successive trimesters while manager of the group Using this expertise HiPERiSM Consulting, LLC, was established in 1998 as a North Carolina Company to service High Performance Computing users in US Government and Industry. Further details are available at http://www.hiperism.com.
Janusz Rebielak
Professor (Ph.D) Janusz Rębielak, born in 1955, he studied architecture mainly in the field of engineering design of spatial structures, he obtained the Ph.D. in 1982 at the Wroclaw University of Science and Technology, in Poland. His scientific interests are very broad and concern mainly the methods of calculations of statically indeterminate trusses as well as the methods of numerical shaping and design of spatial structures intended for civil engineering particularly in area of lightweight roof structures and foundation systems of heavily loaded buildings placed on soils with low bearing capacity or located in seismically active areas, while in area of aviation and aerospace engineering his research is focused in design of VTOL aircrafts and a specific type of manned spacecraft. He published numerous papers, including three monographs, he obtains five patents. He is retired professor of the Cracow University of Technology, Poland, where he recently has been a head of Chair of Structures and Construction Engineering. He is married since 1980, has three children.
Roydon A. Fraser
Roydon A. Fraser, PhD, P.Eng., FEC, is a Professor of Mechanical and Mechatronics Engineering at the University of Waterloo, Canada. He holds a BASc in Engineering Physics from Queen’s University and a PhD in Mechanical and Aerospace Engineering from Princeton University. His research spans hybrid electric vehicles, hybrid energy systems, batteries, compressed air energy storage, geothermal and subsurface energy storage, exergy and thermodynamic optimization, thermal remote sensing, and remote-community decarbonization. Since 1996, he has supervised the University of Waterloo Alternative Fuels Team, using hybrid vehicle systems as a platform for systems-integration education and research. His teaching and supervision have been recognized with multiple awards. He is also a past President of Professional Engineers Ontario.
James McCanney
Professor James McCanney, M.S. Physics-Mathematics hosts the weekly TV show “Master of Science with Professor James McCanney” & radio show "The James McCanney Science Hour - At the Crossroads" WWCR Shortwave Station Nashville, TN (since 2000). He is a favorite guest on national and international radio and TV venues. He appeared in History Channel Specials and on prime time Russian and Japanese TV. Web Page Contact email: info@jmccanneyscience.com Home Page: https://www.jmccanneyscience.com/ He taught mathematics at the University level also Physics, Computer Science and Astronomy and spent 25 years in the telecommunications industry (cyber security, encryption, and communication protocols). He worked with high-level Russian scientists at the University of Novosibirsk. He published peer reviewed papers in mathematics and astrophysics journals and has appeared on prime time Japanese and Russian TV, presented his research at American Geophysical Union meetings, Los Alamos National Laboratories, the Air-Space/America International Air show and International Electric Propulsion conferences; is author of 14 books and inventor of the patented JMCC WING Generator – ushering in “The Jet Age of Wind Energy”. He is an XPRIZE finalist being awarded the 2018 “XPRIZE Technology Innovation Achievement Award” for his work selected over 98 international corporations. His interests are Astronomy, Astrophysics, Space Science and exploration, Electromagnetic Propulsion Systems, Energy, Water, Food, Shelters, Prime Numbers and Education.
Katsuo Sakai
I was born on April 9, 1942, in Matsumoto City, Nagano Prefecture in Japan. In March 1967, I graduated from the Department of Applied Physics, Faculty of Science and Engineering of Waseda University. and joined Ricoh Co., Ltd., where I researched electrophotography technology. 40 years ago, in the world all original papers were printed by typewriters. It has black and red ribbons. And printed black and red characters at the same time However, copy machine printed both on the same paper different times. As a result, the both position deafferented over 1.0mm. At that time, I invented the one-shot two-color electrophotography method, in which, like silver halide film, involves stacking two Red sensitive and not Red sensitive photoconductive layers, and charging them positively and negatively, then exposing them to a red-black image as a result, simultaneously creating positive and negative latent images of red and black were created, then both were developed with red and black toner. This device was exhibited at the 1980 Hanover Messe and received great acclaim. In 2006, I left the company and established the Electrostatic Generator Research Laboratory, Yokohama, Japan. where I am conducting research and development on electrostatic generators. The principle of an electrostatic generator is very simple and clear. First, electric charge is placed on a charge carrier at a low potential, and then an external force such as waves or wind is used to push it up to a high potential, where the carried charge is collected. A few years into my research, I discovered a new type of electrostatic force, which I named "Asymmetric electrostatic force." This phenomenon occurs when a gutter-shaped charged body placed in an electric field experiences an electrostatic force that is weaker at its opening and stronger at the opposite, closed side. This potential difference allows the charge carrier to be transported to a high potential. By varying the charge carrier's charge amount, shape, and position, I simulated the electric potential at approximately 2,000 points within the electric field using the two-dimensional finite difference method. The electric potential at each point can generally be predicted based on physical principles. However, a potential value that differed significantly from these physical predictions appeared at one specific point. So, I replaced the simulation program for that specific point with one that had previously yielded normal potential readings, and the issue was resolved. I had already created thousands of such programs that produced normal potential readings. These results suggest that someone attempted to prevent the realization of this electrostatic power generation method. It is believed that this party was a large corporation concerned that the successful implementation of this electrostatic generator would cause their own sales to vanish. The process is straightforward: although simulation programs are typically written in English-like code, the PC does not begin calculations by reading that text directly; instead, the program is automatically converted into machine code—a format the PC can read—and it is this machine code that the PC reads to start the calculations. So, if they leave the English-language program untouched but modify the machine-language program, the potential at that specific point—and only there—shows an abnormal value, just like this. I suspect they thought this anomalous result would cause me to give up on my research into this electrostatic generator. However, I was able to overcome this interference by replacing it with a normal program. At that time, I had a few thousand normal programs. However, on the day I signed up to attend the international conference in Hamburg, Germany, this coming November, they tried their absolute best to stop me. Up until then, their true identities were unknown, but they actually went so far as to reveal their email addresses while launching the attack. I had websites in both English and Japanese that were displayed on my own PC, but they were taken down. I believe they became inaccessible to everyone around the world. That is not all. As an alternative to the high manufacturing costs associated with gutter-shaped charge transport members, I had been evaluating flat-plate charge transport members—which offer the lowest production costs—but the simulation program and all the related results had been deleted. However, it seems that even though they were unable to access the website for the November conference in Hamburg; consequently, my presentation at the conference was not cancelled. When I connect to the Internet, my PC is completely under their control. Therefore, without connecting, I will create this resume of mine and send it as an attachment to the reply to the email from society. Furthermore, the idea of using a flat-plate charge carrier remains in my head—even though all programs and their results were erased—so I plan to fabricate many its programs without connecting to the Internet and present the optimal configuration at the academic conference in November. However, I am now 84 years old and have health issues. I plan to participate in the November conference online from Japan, but there is a possibility that I may not be able to do so. If the production cost of a gutter-type charge carrier is high and a flat-plate charge carrier becomes necessary, it would be great if I could participate and explain it, but if that is not possible, I hope that young researchers will see my patents and papers and make it a reality.
Friedhelm M. Joge
lm M. Jöge Friedhelm M. Jöge, born in 1943, worked in a scientific laboratory after studying chemistry and mathematics textbooks at a young age and after studying chemical engineering. He then worked in development departments in the chemical and pharmaceutical industries. The focus of his work was in the field of biochemistry and macromolecular chemistry. His interest are the synopsis of various physical, chemical and biological knowledge as well as questions of origin of life and ethics in the field of tension between faith and science. In particular, he dealt with the concept of information. He is married, has a daughter and three Grandchildren. He also loves music and chess. His contributions to science are five articles: 1. Quantum Gravity 2. Theory of Dark Energy 3. Information & Effect: An Introduction to the Concept of Immanence as a Physical Quantity 4. Calculation of Dark Energy and Dark Matter 5. Time is Energy and Dynamic Information (Information flow) 6. Equivalence of Information and Immanence
Liang Tian
Professor Liang Tian, PhD Supervisor, Xi'an Jiaotong University Young Talent (Type A). 2010: B.Eng. in Materials Science and Engineering, Central South University. 2011: M.S. in Materials Science and Engineering, Iowa State University, USA.2012: M.S. in Engineering Mechanics, Iowa State University, USA.2015: Ph.D. in Materials Science and Engineering, Iowa State University / Ames National Laboratory, USA. From 2015, he conducted postdoctoral research at the University of Michigan, Ann Arbor, and Purdue University, USA. In 2020, he assumed a full-time position as a Senior Engineer in Permanent High-Performance Computing in the United States. His research has been positively featured by international authoritative media such as Advanced Science News, the U.S. Department of Energy, and phys.org. He has published papers in reputable journals (Matter, Acta Materialia, FlexMat, Small), independently developed two computational materials methodology software tools and participated in three U.S. Department of Energy research projects. He has served as the conference co-chairs for 6 times, the conference session co-chairs about 20 times, delivered 4 keynote talks and about 30 invited talks. His research focus on the conductive composite materials for cables at various length scales, conductive nanomaterials for flexible sensors, conductive electrodes for flexible batteries. He has won the prestigious international award Advanced Materials Scientist Medal from IAAM.
Enrico Flamini
Graduated in Physics at Roma University “La Sapienza” in 1977, with a thesis on X-Ray spectroscopy applied to Apollo Lunar Samples. Researcher at CNR then ESA Research Fellow at University of Sussex (UK). In 1985 employed at Agenzia Spaziale Italiana first as PA Manager, then as PM for ASI on Rosetta, Mars Express, MRO and the Cassini-Huygens Missions, Co-I of the Cassini Radar and of H-ASI; Chair 2006-10 of Philae Steering Committee; 2008-10: ASI Director of the Observation of the Universe department, Mission Science Director for LARES on VEGA 2012; ASI Chief Scientist from 2010 till retirement; Hemeritus PI of the SIMBIO-SYS instrument on BepiColombo; Vice-Chair and Chair of ESA SPC and Italian Delegate; Delegate to ESA PB-EO; from 2006 Professor of “Solar System Exploration “ at G. D’Annunzio” University-Chieti, Italy. Member of: IMEWG, MEPAG, MPSET, JMART, iMARS1, COPUOS ATEIn. Awarded as Officier de l’Ordre National du Mérite de France and as Exceptional Public Service Gold Medal by NASA; IAU named 18099-Flamini asteroid. More than 100 papers published and 3 books.
Keynote Speakers
Detlef Hoyer
Dr. Detlef Hoyer has a PhD in theoretical electrical Engineering. He investigates Einstein-Maxwell equations derived from 5D Kaluza Relativity, where a scalar field occurs affecting both, gravity and electromagnetism. Recently he began to examine the 5D geodesic equation, which includes electomagnetic forces. Because geodesic equations are about acceleration and not about force, the term charge q over mass m has to be taken into account. Predictions of the theory are reduction of effective mass and a fifth force. Until it is not known, how to achieve those effects or even if they exist at all, his calculations aim for hints, how to arrange experiments for verification or falsification. Dr. Detlef Hoyer earned a college diploma in magnetism and low temperature physics in 1986. He completed his Ph.D. at the Hamburg University of Technology in 1992. Since then he worked as a software developer at a major German insurance company. In 2004 he started his research on Riemannian curvature of higher dimensional manifolds. Now he is an Alumnus of the Technical University of Hamburg in Germany and retired November 2024
Andrea Adamne Major
Dr. Andrea Adamne Major, PhD. is professor at John von Neumann university in Kecskemet, Hungary. She is a researcher in the field of polymer nanocomposites, with a primary focus on the preparation and investigation of carbon nanotube–based systems. Their research centers on understanding structure–property relationships, dispersion mechanisms, and performance enhancement of polymers through nanoscale reinforcement. Through extensive experimental work, Dr. Andrea Adamne Major has contributed to advancing the development of high-performance nanocomposites for advanced engineering and functional applications.
Sabina Luisa Campanelli
Sabina Luisa Campanelli is Associate Professor in Manufacturing at the Department of Mechanics, Mathematics and Management (DMMM) of the Polytechnic University of Bari. Her scientific research mainly concerns laser additive manufacturing of metals, laser materials processing, lightweight fabrication through additive manufacturing, laser micromachining welding, optical and thermal in-situ monitoring of additive and welding processes, additive repair. She is the Head of the “Laboratory of Manufacturing Processes by Laser Technologies” of DMMM of Polytechnic University of Bari (http://www.en.poliba.it/research/laboratory-manufacturing- processes-laser-technologies).
Sergio Alegre Calero
Sergi Alegre is a seasoned expert in airport and aviation affairs with extensive experience across Europe and Spain, focusing on airport regions, sustainable mobility, and urban-airport integration. He has held key leadership roles, including Director General of the Airport Regions Council (2018–present) and President of the same organization (2011–2016). In Spain, he served for many years as Vice-Mayor of El Prat de Llobregat, overseeing urban planning, environmental, and mobility policies. He has also contributed to national aviation governance through roles in the Spanish Observatory of Cities and Airports, the Committee of Spanish Cities with Airports, and the Environmental Committee of Barcelona–El Prat Airport. His work extends to European Union-funded projects related to airport sustainability, noise management, decarbonisation, regional employment, and multimodal transport systems. He has also been actively involved in multiple advisory boards for aviation research initiatives across Europe. In addition, he has contributed to publications on airport cities and aviation governance, including studies on airport-driven economic development and planning. A frequent international speaker, he has participated in numerous conferences across Europe, Asia, and the Americas, sharing expertise on smart airports, regional aviation development, and sustainable air transport.
Zhengxian Liu
Zhengxian Liu, Associate Professor at the School of Aerospace Science and Technology, Harbin Institute of Technology, has been selected for the 2023 Postdoctoral Innovation Talent Support Program (Boxin Program). He has long been committed to the basic theory of mechanics, intelligent composite material design, space deployable structures, aerospace applications, etc., published 19 SCI papers, presided over 6 projects including the Young Scientists Fund of the National Natural Science Foundation of China, and served as a member of the Smart Composites Professional Committee of the Chinese Mainland Federation of the International Society for Advanced Materials and Manufacturing Engineering (SAMPE), the executive director of the expert think tank of the New Material Development Alliance, the member of the Composite Structure Design Special Committee of the China Composite Materials Society, the member of the Youth Working Committee of the China Composite Materials Society, and so on
Oliver King Smith
Shortened version Oliver holds a PhD in Mathematics from UC Berkeley and an executive MBA from Stanford, and is an innovator with expertise in Data Visualization, Statistics, Machine Vision, Robotics, and AI. As a serial entrepreneur, he has founded three companies and contributed to two successful exits. At his latest company, smartR AI, Oliver King-Smith spearheads innovative patent applications harnessing AI for societal impact, including advancements in health tracking, support for vulnerable populations, and resource optimization. Throughout his career, Oliver has been dedicated to developing cutting-edge technology to address challenges, and today smartR AI is committed to providing safe AI programs for manufacturing, MHI and SCM, and resource optimization, within your own secure and private ecosystems.
Lan Luo
Lan Luo, Associate Professor at the School of Aerospace Science and Technology, Harbin Institute of Technology. The applicant focuses on the design, synthesis, preparation, and application of intelligent materials and has achieved a number of research accomplishments. They have published 20 SCI-indexed papers in journals such as Advanced Functional Materials, ACS Nano, Chemical Engineering Journal, Advanced Science, and Research, including 2 papers recognized as highly cited. Additionally, they have filed 14 national invention patents, been granted 7 invention patents, and been authorized for 2 software copyrights.
Marcel Graf
Dr. Ing. Marcel Graf is a researcher and academic in the field of Advanced Manufacturing Technology and Metal Forming. He was born on 29 June 1985 in Karl-Marx-Stadt (now Chemnitz), Germany, and currently serves as a Research Associate, Project Manager, and Chair of Materials and Surface Engineering at the Institute of Materials Science, Engineering, and Manufacturing at Chemnitz University of Technology, Germany. He completed his secondary education at Albert Schweitzer School in Zschopau and later earned his Diploma in Mechanical Engineering from TU Bergakademie Freiberg, specializing in Research and Development for Metal Forming Technology, Metallurgy, Foundry, and Forming Machines. He further obtained his Ph.D. from TU Bergakademie Freiberg with research focused on the “Development of Forming Behaviour of Oxide Scale in Metal Forming Processes under Hot Strip Rolling.” Dr. Graf has extensive expertise in product development, process engineering, virtual production engineering, and tribology in metal forming. His technical skills include CAD and simulation software such as Pro/Engineer, Siemens NX, PTC Creo, SolidWorks, MSC Simufact Forming, LS-DYNA, and ANSYS. Over the years, he has contributed significantly to research in hot rolling, bulk metal forming technology, and scale formation, and has participated in numerous international seminars, conferences, and scientific committees. He is fluent in German and English, with basic knowledge of Russian.
Jerry Zeyu Gao
Jerry Zeyu Gao is a professor at the Department of Computer Engineering at San Jose State University, California, USA. Now, he is the steering board chair of The IEEE International Congress on Intelligent and Service-Oriented Systems Engineering (CISOSE) from 2016-present, and steering board and organization chair of IEEE Future Technology Summit from 2019 – Present. In addition, he is the director of SJSU research center on Smart Technology, Computing, and Complex Systems. He had over 27 years of academic research and teaching experience and over 10 years of industry working and management experience on software engineering and IT development applications. He has published three technical books and over hundreds (350) publications in IEEE/ACM journals, magazines, international conferences and workshops. His Google Scholar citation is over 10,500+ and his ResearchGate reads is over 388K+. His current research areas include machine learning, smart cities, AI test automation, AI clouds and mobile clouds. In 2010, Jerry Gao has been recognized by University of Texas at Arlington as a distinguished Alumna for College of Engineering at its 50th anniversary. In 2011, he was award as a KSI Fellow in SEKE2011. In 2013, Dr. Gao has received the College of Engineering Faculty Award for Excellence in scholarship, Dr. Gao served as an editorial board member and an associate editor for numerous international journals in software engineering, machine learning, and smart cities, such as IEEE Software, Journal of Smart Cities, Energies, and Agriculture. Dr. Gao has been included and listed in Marquis American Who's Who 2020-2022. In last 10 years, Dr. Gao has played as one of leaders in organizing many international conferences and workshops as a conference co-chair, program co-chair, and workshop co-chair. Now, he is the steering board chair for IEEE CISOSE congress and IEEE Future Technology Summit, and the steering board member for IEEE Smart World Congress. IEEE CISOSE congress includes IEEE BigDataService, IEEEAITest, IEEE Intelligent Mobile Cloud, IEEE SOSE, and IEEE DAPPS. In addition, he served as a chair for many other conferences, such as IEEE CAI2025, IEEE AITest2025, IEEE BigDataService*, IEEE MobileCloud*, IEEE Smart World Congress 2017, Smart City Innovation 2017, SEKE06-2016, IEEE SOSE2011-2013, ICYCS'05, TQACBS2005-2006, WMCS2004-2010, IEEE EMOBS07-08, TEST'07, and EECC2006. Today, Dr. Gao has served as an editorial board member for numerous archived journals. Recently, He has been invited by many international conferences as a keynote speaker to address topics in Ai Test Automation, Smart Cities, UAV AI cloud, Green Energy Ai Cloud, Smart Agricultures, and Intelligent Wildfire Platforms.
Diogo Ferreira Lima Filho
Graduated in Telecommunications Engineering from the Military Institute of Engineering (1982), Master in Electrical Engineering from the State University of Campinas (1989), PhD in Electrical Engineering from Poli USP (2015). Currently is full professor at Universidade Paulista (UNIP). Has experience in the area of Electrical and Computer Engineering, with emphasis on Telecommunications Systems, Networks and Computer Architecture, acting mainly on the following theme: Algorithms and protocols to ensure QoS in wireless sensor networks for applications in IoT- Internet of Things. Currently performs research with Graphene as a substrate for electronic circuits with applications in Wireless Sensor Networks and Quantum code applications for quantum computing.
Xiyuan Chen
Xiyuan Chen received the Ph.d. degree in Precision Instrument and Mechanical Engineering from Southeast University, China, in1998. He went to Poleticnic di Turino, Italy(2005-2006),North Carolina State University, USA(2009), University of Birmingham, UK (2017) and Tohoku University, Japan(2025) as a senior visiting scholar or a senior research scholar. He is currently the professor of school of instrument science and engineering, southeast university, China. He is also the dean of at the Guizhou Institute of Technology. His research interests include inertial navigation and integrated navigation and GPS software receiver and wireless location technologies, weak-signal GNSS, hybrid navigation and related application. He was elected as a IET Fellow and is also a Senior member of IEEE and a Council member of the China Instrument and Control Society. He is author or contributing author of more than 300 technical papers, reports and has been granted over 160 invention patents in China and 6 invention patents in the United States. He received over 10 awards including the Special Commendation Gold Award and Gold Award at the Geneva International Invention Exhibition.
Shyy Woei Chang
Shyy Woei Chang is a Professor at National Cheng Kung University, Taiwan. He received his B.Eng. (First class) in 1992, Ph.D. in 1995 and D.sc. in 2010 from University of Wales, Swansea, UK. His main research interests are heat transfer enhancement, gas turbine blade cooling, electronic cooling, electrical motor cooling, thermal fluid phenomena in ocean motion, two-phase flow and heat transfer.
Gabriel Barcelo Rico Avello
Born in 1940. I hold a PhD in Industrial Engineering from the OUTSIDE in the Polytechnic University of Madrid, and a degree in Physics from the Complutense University of Madrid. I have been engineer specialized in air conditioning installations, Consulting Engineer, public servant in the tax administration agency, Deputy Director General of the Ministry of Finance of Spain, responsible for the data processing center, professor at the Polytechnic University of Madrid and business advisor. With a group of collaborators, I have developed over the last fifty years a private research project in rotational dynamics, conducting experimental tests and proposing a scientific theory about the behavior of bodies subjected to acceleration, called the Theory of Dynamic Interactions. I have published more than thirty books on physics, engineering, and history, and numerous articles on these topics. Currently retired, but I continue working on research projects and writing books and articles.
Fengfeng Li
Fengfeng Li, Associate Professor at Harbin Institute of Technology, Scientific Editor for International Journal of Smart and Nano Materials. Her research interests are mechanics of shape memory polymers composites, experimental mechanics and smart space deployable structures. She has published 28 journal papers in Composites Part A, Composites Part B, Mechanics of Materials, etc.
Rashid Ali Laghari
Dr. Rashid Ali Laghari is PhD in Mechanical Engineering from the Harbin Institute of Technology, Harbin, China. In 2021, He joined the Postdoctoral Research Fellow at the College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China. Later in 2022, he joined another Postdoctoral Research Fellowship at the Interdisciplinary Research Center for Intelligent Manufacturing and Robotics, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia. In 2024 he started working as an Assistant Professor in Sindh Institute of Management and Technology, Karachi, Pakistan. Currently he is working as Associate Professor in School of Intelligent Manufacturing, Shanghai Zhongqiao Vocational and Technical University, Shanghai 201514, China, Where he taught courses such as Mechanics of Machines and Materials, Solid Mechanics, and Manufacturing Processes. He specializes in Intelligent manufacturing, Artificial Intelligence, Finite Element Analysis and predictive modeling and optimization of the machining process, difficult-to-cut Metal Matrix Composite materials, Fabrication of SiCp/Al Metal Matrix Composite Materials through powder metallurgy and functionally graded ceramic cutting tool inserts, Internet of things (IoT), Industrial Internet of things (IIoT) , Soft computing, process monitoring of CNC machines. 3D printing and 4D printing of smart materials, and composite materials, Laser additive manufacturing of composite materials.
Mihail Avramov
Dr. Mihail Avramov graduated from Sofia University “St. Kliment Ohridski” in 1991, specializing in Theoretical Chemistry, and has worked in its Department of Physical Chemistry since then. His early research focused on thermodynamics, the dynamics of liquid surfaces, and phase formation. He obtained his doctoral degree in 2001. Alongside his academic career, he founded Metrology LAB, developing an applied engineering direction in automated measurement, industrial vision, and sensor development. His work connects physical modelling with the design and implementation of measurement systems, including laser triangulation sensors and applications in industrial automation. His current interests include AI-assisted engineering and methods that connect mathematical models, parametric CAD, engineering review, and experimental feedback. Through LAITRACK, he explores how these tools can support a coherent design process, creating more space for conceptual thinking while keeping engineering decisions grounded in traceable evidence.
Yuval Cohen
Professor (Ph.D) Yuval Cohen is a Senior Faculty Member at the Industrial Engineering department of the Afeka College of Engineering. His research area is focused on the improvement of industrial systems by integrating intelligent manufacturing, collaborative robots, and advanced technologies .
Dou. Zhang
Dr. Dou Zhang is an Assistant Researcher and M.S. Supervisor at Harbin Institute of Technology, China. Her research focuses on the mechanical behavior of shape memory polymer (SMP) composites and their application-oriented validation, with particular emphasis on constitutive behavior, thermo-mechanical coupling, and structure-function integration for deployable mechanisms. The SMP-based locking-and-release deployment mechanism developed by her team enabled the first dynamic unfurling of the national flag on China’s inaugural Mars mission, Tianwen-1. This achievement was selected as one of the “Top Ten Scientific and Technological Advances of Chinese Higher Education Institutions” in 2021.
Alexander Sharmazanashvili
Since 2005, Prof. Sharmazanashvili has served as a Team Leader within the ATLAS Experiment at CERN, Geneva, Switzerland. He received his PhD in 1992 from Bauman Moscow State Technical University. In 2005, he completed his Doctor of Science (DSc) degree at Georgian Technical University. In 2010, he was awarded the State National Prize in the field of Information Technologies. In 2020, he received an Honorary Diploma from the Georgian Academy of Sciences for his scientific achievements in Mechanics and Informatics. Prof. Sharmazanashvili has served as Scientific Chair and Project Manager for 25 collaborative projects at CERN. He has supervised 4 PhD and 18 MSc theses. He is the organizer and chairperson of the annual South Caucasus workshops on computing in 2010, 2012, 2016, 2018, 2021, and 2022 organized in collaboration with CERN. He is the author of 6 books and 58 peer-reviewed scientific publications.
Emin Taner Elmas
Asst.Prof. Dr. Emin Taner ELMAS is a Mechanical Engineer having degrees of B.Sc., M.Sc., Ph.D., and was born in Sivas in 1974. He completed his doctorate at Ege University, Graduate School of Natural and Applied Sciences, Mechanical Engineering Department, Thermodynamics Science Branch, and his master's degree at Dokuz Eylül University, Mechanical Engineering Department, Energy Science Branch. He also completed his undergraduate education at Hacettepe University, ZEF, Mechanical Engineering Department and graduated from the faculty with honors in 1995 and became a mechanical engineer. He was awarded a non-refundable scholarship by the Turkish Chamber of Mechanical Engineers in his 4th year because he was the most succesful student during his first 3 classes study at the faculty. He graduated from İzmir Atatürk High School in 1991. Asst. Prof. Dr. ELMAS has completed his military service as a NATO Officer in Bosnia and Herzegovina. He was a “Reserved Officer” as a “2nd Lieutenant” as an “English-Turkish Interpreter”. He was also a “Guard Commander” and served in Sarajevo, Camp Butmir within the SFOR task force of NATO. He has been awarded with 2 (two) NATO Medals and Turkish Armed Forces Service Certificate of Pride (Bosnia & Herzegovina). In addition to his academic duties at universities, he has worked as an engineer and manager in various industrial institutions, organizations and companies; He has served as Construction Site Manager, Project Manager, Management Representative, Quality Manager, Production Manager, Energy Manager, CSO-CTO, CBDO, Factory Manager, Deputy General Manager and General Manager. Asst. Prof. Dr. Elmas is Department Head and is an Assistant Professor of Automotive Technology at the Department of Motor Vehicles and Transportation Technologies at Vocational School of Higher Education for Technical Sciences at IGDIR UNIVERSITY, Turkey. He is also an Assistant Professor of Bioengineering & BioSciences at the same university. He has nearly 30 years of total experience in academia and in industry. He has served as a scientific referee and panelist for ASME, TUBITAK and many scientific institutions, organizations and universities, including NASA. He has published numerous international and national academic scientific articles, books, and book chapters, and serves as an editor for international academic journals. He also serves on the scientific committees of many international conferences, publishing conference and congress proceedings and giving presentations. “Mechanical Engineering, Energy Transfer, Thermodynamics, Fluid Mechanics, Heat Transfer, Higher Mathematics, Evaporation, Heat Pipes, Space Sciences, Automotive, Bioengineering, Medical Engineering Applications, Neuroengineering, Medical Technique” are his academic and scientific fields of study; “Heating-Ventilation Air Conditioning Applications, Pressure Vessels, Heat Exchangers, Energy Efficiency, Steam Boilers, Power Plants, Cogeneration, Water Purification, Water Treatment, Industrial Equipment and Machinery, Welding Manufacturing, Sheet Metal Forming, Machining” are his industrial experience fields. As of 2026, he has been awarded the Nobel Scientist Award by the international platform organization Scientific Laurels. Asst. Prof. Dr. Emin Taner ELMAS is also a musician, saz (baglama) virtuoso player and ney (Nay, Turkish Reed Flute) performer. He plays also cümbüş instrument and performs darbuka rhythm instrument. He has a YouTube Music Channel (Emin Taner ELMAS) which includes some of his sound recordings of him playing the saz-baglama and blowing the ney. He composed the poem written by the great poet Âşık Veysel ŞATIROĞLU under the name of “Raşit Bey” in memory of his father Judge (Hâkim) Raşit ELMAS as “Raşit Bey Türküsü”, wrote it down, notated and published it as an academic article and broadcasted this song on his own music channel. He wrote the poems entitled “Canım Babam” and “Geldim Babam” which he wrote also in memory of his father and published in an academic literature journal, and composed instrumental musics for these poems. He also composed an instrumental song called “Annem Annem Türküsü” and gave it to his mother, Lawyer Tuna ELMAS, as a gift on Mother’s Day, 11.05.2025. He also has a poem titled "Ney and Neyzen." He also wrote and presented a poem titled "Esra Kardeşim" to his sister, Esra ELMAS, an archaeologist and English teacher. He has published books including "Saz-Bağlama Tuning System Method" (“Saz- Bağlama Akort Sistemi Metodu”) and "Ney and Neyzen; Ney's Pitches, Frets, Sound Stages, Octaves, Structure, Performance, Ney Maintenance and Basic Music Theory" (Ney ve Neyzen; Ney’de Perdeler, Ses Devreleri, Oktavlar, Yapısı, İcrası, Ney Bakımı ile Temel Musiki Nazariyatı) and My Collection of Literary and Musical Art Works – I Story / Anecdote / Essay / Poetry / Verse / Prose / Humorous; witty - satirical; poetic stories / Lyrics / Composition (Edebiyat ve Musiki Sanat Eserleri Külliyatım – I Hikâye / Anekdot / Deneme / Şiir / Manzume / Nesir /Mizahi; nükteli – hicivli; şiirsel hikâyeler / Güfte / Beste). He continues his artistic studies by writing various articles, books, poetry, lyrics and also realizing musical composition and repertoire works.
Luciano Lorenzi
Luciano Lorenzi was born in Ventimiglia (Imperia, Italy) on 16 October 1949. He studied in Mondovì in the 1960s and took his degree in Physics in 1975, with the assistance of the Astronomer Prof. Franco Scaltriti, having already been involved in research at the Turin Astronomical Observatory for three years. Lorenzi earned the title of Astronomer in 1978 through a national selection, followed by another appointment again in Turin, where he remained until 1 September 1987. At his own request, on the same date he joined High Schools in the Province of Cuneo to teach Physics. From 21 December 1989 until early 1992, Lorenzi coordinated and supported the Mondovì Astronomy Study Center, together with the two OATO Directors, Professors Alberto Masani & Attilio Ferrari. Its goals included a variety of cultural objectives focusing on research, teaching and communication, with the clear intention of promoting the city as the heir to an ancient university institution, as well as the birthplace of the founder of the Turin Astronomical Observatory, Father Giovanni Battista Beccaria. He was also a Senator of the Italian Republic for three consecutive legislatures from 1992 to 2001. In the same period, from 1994 to 1999, he was a member of the “Council of Europe” and the “Western European Union Assembly”. He was an active parliamentarian in the Senate of the Italian Republic and the “Council of Europe”. In particular, he promoted Law 315 dated 3 August 1998, which allocated 8.1 billion lire for university building projects in Mondovì through Turin Polytechnic University. He was also instrumental in achieving approval of “RESOLUTION 1080 (1996) on the detection of asteroids and comets potentially dangerous to humankind” by the “PARLIAMENTARY ASSEMBLY OF THE COUNCIL OF EUROPE”. He has around seventy publications in various scientific fields, dealing specifically with Astronomy, Variable Star Astronomy, Large-Scale Structure of the Universe, Cosmology and Cosmogony.
Hanxing Zhao
Zhao Hanxing, Ph.D., Assistant Professor at Harbin Institute of Technology, Master’s Supervisor, Member of the Youth Working Committee and Polymer Matrix Branch of the Chinese Society for Composite Materials. He has long been engaged in research on intelligent materials and structural mechanics, including the analysis of SMPC fiber micro-buckling and structural macro-buckling, as well as the design of SMPC space deployable structures. He has published over 10 SCI papers and serves as a youth editorial board member and guest editor for several domestic and international journals.
Thamo Sutharssan
Dr. Thamo Sutharssan is a Senior Lecturer at the University of East London, where he leads the BEng in Aeronautical Engineering Program. With an extensive background in higher education, he has previously delivered and validated BTEC, HNC, HND, BEng, and MEng programs at institutions including the University of Portsmouth, Havering College, Derby College, and the Rolls-Royce Aerospace Academy. An active researcher in engineering system health monitoring and renewable energy, Dr. Sutharssan served as a Research Associate on a £177,500 Knowledge Transfer Partnership (KTP) project developing automated hydrogen fuel cell demonstrators with the University of Hertfordshire, and as a Research Fellow at the University of Greenwich. Dr. Sutharssan is a Chartered Electrical and Electronic Engineer (CEng, MIET), a Chartered Manager (CMgr, FCMI), and a Fellow of the Higher Education Academy (FHEA).
Joseph P. Firmage
Joseph P. Firmage is a researcher and author developing Potentum Physics, a geometric-algebra approach that presents atoms, fields, and coherence as conjugate rotations of interlinked flux. Through the ORIGAMI Physics Observatory and the Academy of Science and Arts, his work pairs classical field intuition with GA rotors and high-fidelity visual plates—codified as Canon 12, a publication standard for accessible, equation-light pedagogy. Recent KAIROS reports include The Loving Atom (Canon 12) and ongoing studies connecting quasar jet torsion, hydrogen spectroscopy, and molecular resonance to macroscopic design principles relevant to sustainable habitats. His current focus is translating these insights into practical frameworks for science education, materials thinking, and ecosystem-aligned engineering on Earth and future Martian settlements.
Maria Pia Fanti
Cooperative, Connected and Automated Mobility (CCAM) is expected to reshape the way of travelling and moving in Europe and around the world. By the CCAM, the automated vehicles have to be integrated into the mobility and transport system by designing and implementing infrastructures, new services, platforms, cooperation and governance models. The smart traffic management and the deployment of CCAM innovative technologies and services is increasing efficiency and reducing congestion. This talk presents the approaches that are used to accelerate the implementation of innovative CCAM technologies and systems. The proposed methodology is based on the implementation and integration of enhanced Physical, Digital and Operational Infrastructures to enrich CCAM services and increase safety and traffic efficiency. The proposed actions will help to develop new mobility concepts, leading to healthier, safer, more accessible, sustainable, cost-effective and demand-responsive transport. Some solutions will be presented using Artificial Intelligence techniques and optimization strategies applied for a full integration of CCAVs in the real traffic for transportation of both passengers and goods.
Invited Speakers
Riccardo Trevisiol
Riccardo Trevisiol is an Aerospace Engineering student at the University of Padua, with a strong focus on the analysis and testing of hybrid space propulsion systems. His journey with the university THRUST Team started in the Recovery division. There, he worked directly on CAD design, rapid prototyping, and the physical assembly of components, from folding parachutes to running ground deployment tests with black powder and CO2. His dedication led him to become the Recovery Team Lead. In this role, he took full responsibility for the dual deployment recovery system of a solid COTS sounding rocket. He designed the ejection mechanisms, optimized the parachute integration, and validated the activation timing. This hard work paid off during a successful launch campaign in Roccaraso, where the launch vehicle was safely recovered from an apogee of 1000 meters. Building on this practical experience, Riccardo is now the Team Leader of the entire THRUST Team, guiding a multidisciplinary group of 80 students. He currently oversees two major aerospace projects: an SRAD hybrid rocket powered by a Paraffin and N2O engine scheduled for launch in August 2026, and a solid COTS rocket preparing for the European Rocketry Challenge (EuRoC) in October 2026. Through careful systems engineering, he coordinates key milestones like PDR and CDR, manages budgets, and aligns team schedules to ensure mission readiness.
Massimiliano Tosini
Massimiliano Tosini is a graduate student in Aerospace Engineering at the University of Padua, with a strong focus on propulsion systems, launch vehicle development, and experimental testing. His academic path combines advanced engineering studies with hands-on experience in applied aerospace projects. For the past two years, he has been part of THRUST, the student rocketry team of the University of Padua, where he serves as Head of the Propulsion Department and Technical Lead of the team’s new launch vehicle. In this role, he coordinates activities related to propulsion system development, integration, testing, and technical decision-making within a multidisciplinary engineering environment. His previous experience includes work on the development of a solid-propellant rocket, with activities related to propulsion-oriented design, structural integration, component manufacturing, and flight simulation. This background has strengthened his ability to connect theoretical engineering knowledge with practical design, testing, and validation processes. Massimiliano’s profile combines aerospace propulsion, vehicle-level system integration, simulation, programming, and aviation operations. He holds a Private Pilot Licence and drone-related certifications, which further support his understanding of flight systems from both technical and operational perspectives. He is particularly interested in propulsion technologies, launch systems, experimental validation, and simulation-based design for advanced aerospace applications.
Gopikrishna Rangarajan
Gopikrishna Rangarajan is working as a Scientist in the Structural Testing Facility and pursuing his PhD in the area of buckling of shells. He has vast expertise in the area of Experimental validation of aerospace structures and components. He has implemented innovative solutions in structural and pressure testing of components as well as full scale airframes. He completed his Masters from the Indian Institute of Technology, Madras in 2015. He has received the Young Researcher Award in his organisation during the year 2019. He has presented technical papers in various International Conferences and also published in leading journals in the area of Structures and Experiments. His research areas include buckling, Acoustic Emission Monitoring, Load and pressure test on structures and thermo-structural tests on sections.
Shambhu Kumar Manjhi
Dr. Shambhu Kumar Manjhi is currently working as an Institute Postdoctoral Fellow in the Department of Mechanical Engineering at the Indian Institute of Technology Bombay (IIT Bombay), India. His current research focuses on the design, development, and experimental validation of an electron beam-based hybrid additive manufacturing system, with particular emphasis on advanced manufacturing technologies, system development, and the fabrication of complex metallic components. Prior to joining IIT Bombay, Dr. Manjhi worked as a Project Associate in the Department of Materials Engineering at the Indian Institute of Science (IISc), Bangalore, India. During his tenure at IISc, he was involved in the development and processing of aluminium alloy automotive components, including connecting rods, I-links, H-links, and brake discs, using advanced manufacturing techniques such as die casting and Wire Arc Additive Manufacturing (WAAM). Dr. Manjhi received his PhD in Mechanical Engineering in 2025 from the National Institute of Technology Karnataka (NITK), Surathkal, India. His doctoral research focused on the additive manufacturing of magnesium alloys for lightweight structural applications. His work involved the numerical optimization of Cold Metal Transfer Wire Arc Additive Manufacturing (CMT-WAAM) process parameters, followed by comprehensive experimental validation. He investigated the microstructural evolution, mechanical performance, fatigue behaviour, and corrosion resistance of WAAM-fabricated magnesium structures. In addition, he examined the effects of advanced surface modification techniques, including laser surface melting (LSM) and low plasticity burnishing (LPB), on the fatigue and corrosion performance of additively manufactured magnesium alloys. His doctoral research resulted in eight peer-reviewed journal publications and four international conference papers. He obtained his Master of Technology (M.Tech.) in Manufacturing Engineering in 2020 from the National Institute of Technology Jamshedpur, India. His master's research focused on the friction stir welding of dissimilar magnesium and aluminium alloys for lightweight engineering applications. He completed his Bachelor of Technology (B.Tech.) in Mechanical Engineering in 2016 from Biju Patnaik University of Technology (BPUT), Rourkela, India, where his undergraduate major project focused on the design and development of a solar water heater for domestic applications. Dr. Manjhi's research expertise broadly encompasses metal additive manufacturing, Wire Arc Additive Manufacturing, electron beam-based manufacturing, hybrid manufacturing, welding and joining of metallic materials, lightweight alloys, surface engineering, fatigue and corrosion behaviour, and advanced materials characterization. His research interests are directed toward the development of advanced manufacturing processes and their application to lightweight, high-performance structural components for aerospace, automotive, and other engineering applications.
Poster Presenters
Robert Jakubowski
Robert Jakubowski, PhD, Eng. is an Assistant Professor at the Department of Aerospace Engineering, Rzeszów University of Technology, Poland, where he has been working since 1998. He initially served as an Assistant and, after obtaining his Ph.D. in 2004, became an Assistant Professor and Lecturer. He teaches courses on Turbojet Engine Theory, Modelling and Analysis of Turbojet Engine Performance and Numerical Analysis in Aviation Applications. His research focuses on thermodynamic modeling and performance analysis of aero engines, particularly turbojet and turbofan engines. He conducts conceptual studies on advanced propulsion systems such as inter-turbine burner engines and turbofan engines with reheaters. His work includes developing numerical models, mainly in MATLAB, for analyzing engine performance under various operating conditions. He gained professional experience at MTU Aero Engines Poland, where he worked in the Performance Department for over three years. He is the author and co-author of several scientific papers on aircraft propulsion systems.